• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar

Sigma Fasteners

Manufacture and Distribute Fasteners for Energy

Phone: (281) 214-8800
Fax: (281) 214-8801

  • Products
    • Custom Bolting
    • Coated Bolts
    • Stud Bolts
    • Products
    • Catalog
    • Worldwide
  • Industries
  • Quality
    • Survey
  • Get Quote
  • Contact
    • Careers
  • About
    • Conflict Minerals Sourcing Policy
    • Privacy Policy
    • Press Releases
You are here: Home / Archives for Bolts Stud

Bolts Stud

Stud Bolts

January 12, 2017 By Sigma Fasteners

Stud Bolts

Stud Bolts

Stud Bolts
Stud Bolts

Stud bolts are available in ASTM Grades B7, L7, B16, B16M, L7M, B8, 660 and B8M; they are also available exotic metals such as Monel, Titanium, Inconel, Alloy 20, and Hastelloy, 17-4PH. These studs are also available with industrial coatings such as SermaGard, Xylan, PTFE, Fluoropolymers and other coatings.

Stud Bolts for Pressure-Temperature Piping

  • Continuous Thread Studs (Fully Threaded Studs)

Stud bolts are threaded end to end and are often used for flange bolting with two nuts on either end.

There are two types of these studs.

  • Type one – usually for general purpose; the length of stud is measured from end to end. Threads are UNRC-2A.
  • Type two – studs for high temperature pressure piping. These studs are made to dimensional standard requirements of ANSI B16.5 the length of this stud is measured from first thread to first thread, exclusive of points. Threads are UNRC-2A for sizes 1 inch and under and 8 UNR-2A for sizes over 1 inch. The length of stud bolt, measured parallel to the axis, is the distance from first thread to first thread. First thread is defined as the intersection of the major diameter of the thread with the base of the point.

Double End Stud Bolts

Tap End Stud Bolts

ASTM Material Selection Chart

Double End Studs

January 11, 2017 By Sigma Fasteners

Duplex Stainless Double End Studs Bolts

 

Double End Studs – Double ended studs

Double End Studs Bolts
Double End Studs

At Sigma Fasteners we provide mission critical bolting products for the nations leading manufacturers of pressure control equipment for controlling pressures during drilling and oil production.

Double-end studs used by many of these manufacturers have equal-length threads on each end to accommodate a nut and are threaded to a Class 2A fit. Length of stud is measured overall. Both ends have chamfered points, but round points may be furnished on either or both ends at the manufacturer’s option, This style is furnished in the same four types listed for tap-end studs. Double-end studs are used for flange bolting or other applications where torching from both ends is necessary or desirable.

Most steel grades not heat treated or quenched and tempered can be furnished on special order for production quantities. Only the Type 2 continuous thread studs made to specification ASTM A193 grade B7 are stocked in a full range of sizes.

ASTM Material Selection Chart B7, B7M, L7, L7M, 660, 718 Inconel, MP35N

Tap End Stud

November 13, 2016 By Sigma Fasteners

Tap End Stud Bolts

Sigma Fasteners manufactures Tap End Stud bolts to your print, Tap End Stud Bolt Standard or AWHEM Standard in all ASTM grades.

Tap End Stud Bolts
Tap End Stud Bolts

Tap end studs have a short thread length on the tap-end side typically threaded tor Class UN-3A fit. This side is screwed into a tapped hole. The nut end  of the stud is threaded with a Class UN-2A fit. Length of the stud is measured form end to end. The tap end has a chamfered point, but the nut end may have either a 30° or 45° chamfered end or round raduised end, at the customers option.The tap end can be measured from the end to last scratch, end of the chamfer to the last full thread or any combination of last scratch, last full thread, end or end of chamfer.

Tap-end studs in standard and exotic metals with multiple finishes:

ASTM B7, B7M, B8, B8M, 660,718, 17-4ph, MP35 and more.

Unfinished, SermaGard, Xylan, PTFE. Moly, zinc or cad plated.

Sigma can lower your cost for tap end studs with contract pricing or managed inventory.

ASTM Material Selection Chart

Catalog: Tap End Stud

    Your Name (required)

    Your Email (required)

    Phone Number (required)

    Company (required)

    Message

    Attach File: Allowed File types: .pdf .txt .tif .tiff .jpg .doc .docx .dwg .xls .xlsx
    Max 2MB

    Primary Sidebar

    Products and Services

    • Coated Bolts
    • Custom Bolts
    • Fasteners
    • Industrial Coating Service
    • Press Releases
    • Stainless Bolts
    • Standard Bolts
    • Stud Bolts

    More

    • About
    • About
    • Careers
    • Catalog
    • Contact
    • Get Quote
    • Industries
    • Jobs
    • My Calendar
    • Privacy Policy
    • Products
      • Coated Bolts
      • Custom Bolting
      • Stud Bolts
      • Worldwide
    • Quality
      • Conflict Minerals Sourcing Policy
      • Survey

    Toll Free: (866) 378-3044
    Phone: (281) 214-8800
    Fax: (281) 214-8801

    • Products
    • Industries
    • Quality
    • Get Quote
    • Contact
    • About

    Careers · Privacy Policy · Conflict Minerals

    Copyright © 2020 · Sigma Fasteners, Inc