Sigma Fasteners

Manufacture and Distribute Fasteners for Energy

Phone: (281) 214-8800
Fax: (281) 214-8801

You are here: Home / Archives for 316 Stainless Steel Bolt

316 Stainless Steel Bolt

Heavy Hex Bolts

By

Heavy Hex Bolts 

Heavy Hex Head Bolt
Heavy Hex Head Bolt

There are several ASTM bolting specifications that require a heavy hex head – larger than a standard or finished hex head. These specifications include: A193, A320 and A307B. Although A325 and A490 bolts also require a heavy hex head, they refer to Structural Bolts for dimensional specifications, since structural bolts have shorter thread lengths than standard heavy hex bolts. 

Heavy Hex Bolts are used in a varity of OEM equipment and can be manufactured in multiple ASTM grades. 

ASTM Material Selection Chart  

Check Out Heavy Hex Bolts our Bolt Catalog for Sizes and Dimensions.

Stainless Bolts

By

304 Stainless Bolts – ASTM A193 Grade 8 Bolts

Grade 304 Bolting is the standard “18/8” stainless; it is the most versatile and most widely used stainless steel bolting, available in a wide range of bolting products.

Corrosion Resistance

Stainless Bolts are excellent in a wide range of atmospheric environments and many corrosive media. Stainless bolts are subject to pitting and crevice corrosion in warm chloride environments, and to stress corrosion cracking above about 60°C. Commercial Stainless bolts are considered resistant to potable water with up to about 200mg/L chlorides at ambient temperatures.

Heat Resistance

304 Stainless bolts have good oxidation resistance in intermittent service to 870°C and in continuous service to 925°C. 304 stainless bolting in continuous at the 425-860°C range is not recommended if subsequent corrosion resistance is important.

316 Stainless Bolts – ASTM A193 Grade 8M

The grade 316 stainless bolt is the standard molybdenum-bearing grade, above the corrosion resistance of 304 bolts within the austenitic stainless steels. The molybdenum gives 316 stainless bolts better overall corrosion resistant properties than Grade 304 bolting, particularly higher resistance to pitting and crevice corrosion in chloride environments.

Corrosion Resistance

316 Grade 8M bolts are excellent in a wide range of atmospheric environments and corrosive media and are generally more resistant than 304. 316 Grade 8M bolts are subject to pitting and crevice corrosion in warm chloride environments, and to stress corrosion cracking above about 60°C. Grad 8M bolts are considered resistant to potable water with up to about 1000mg/L chlorides at ambient temperatures.

316 is usually regarded as the standard “marine grade stainless steel bolting”, but it is not entirely resistant to sea water. In many marine environments at elevated temperatures 316 bolting does exhibit surface corrosion, usually visible as brown staining.

Heat Resistance

Grade 8M bolts exhibit good oxidation resistance in intermittent service to 870°C and in continuous service to 925°C. Continuous use of 316 bolts in the 425-860°C range is not recommended if subsequent aqueous corrosion resistance is important.